4+6 NEGATIVE FUSION CONNECTOR

4 Gauge Negative - Carded
Atlas Trailer
Includes Battery Terminal, Solder Pellet and 1-½" piece of Shrink Tube.
Stock #Retail
0434-11
Request quote

4+6 POSITIVE FUSION CONNECTOR

4 Gauge Positive - Carded
Atlas Trailer
Includes Battery Terminal, Solder Pellet and 1-½" piece of Shrink Tube.
Stock #Retail
0434-21
Request quote

2/0 NEGATIVE FUSION CONNECTOR

2/0 Gauge Negative - Carded
Atlas Trailer
Includes Battery Terminal, Solder Pellet and 1-½" piece of Shrink Tube.
Stock #Retail
0434-31
Request quote

CLAMP-ON BATTERY TERMINAL

Universal Battery Terminal (1), Carded
Atlas Trailer
Universal terminal fits 6 gauge to 2/0 gauge cables. Fit positive or negative posts, all lead.
Stock #Retail
0455-11
Request quote

WING NUT BATTERY TERMINAL

Clamp Type Wing Nut (1), Carded
Atlas Trailer
Converts conventional post type battery for marine use or any clamp type application. Fit positive or negative posts, all lead.
Stock #Retail
0455-21
Request quote

BATTERY BOLT EXTENDER

Side Mount, 1/Pkg
WIRTHCO ENGINEERING INC.
Simple way to connect power to 12-volt equipment or accessories on side mount batteries.
Stock #Retail
430-1
Request quote

CONTOUR HD MASTER SWITCH

MARINCO RECREATION
The Contour Heavy Duty Master switch is rated at 600 Amps continuous and 2500 Amps cranking, it is well suited for higher power loads. The 720RV can be recessed or surface mounted.
Stock #Retail
430-13
Request quote

CONTOUR BATTERY MASTER SWITCH

Battery Switch W/Chassis Label
MARINCO RECREATION
Unique to the Contour Battery Master Switches is the patented contour lock system, allowing the switches to be used as stand alone units, or locked together with other switches. The 701RV also features a control knob which cannot be removed while in the ON or OFF position, but it can be removed by switching to an anti-clockwise 45° position. The 701RV also features removable side plates on 4 sides for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.
Stock #Retail
430-14
Request quote

EASY FIT BATTERY SWITCH

Easyfit™ Battery Switch
MARINCO RECREATION
ParkPower® has listened to its customers and has responded to feedback concerning some installations where switches need to be recessed through varying thicknesses of panels. The 700RV Easyfit™ switch achieves this through and easily removable threaded ring allowing for panel thickness up to 3/4" (19mm). This durable switch is designed with a removable key 45° past the off position, labeled handle and a removable back cover covering exposed terminals. The switch can also be surface mounted offering a unique style compared to other switches available on the market. The 700 Easyfit™ can easily be retrofitted in place of most European post and lever type switches. Specifications: Continuous Rating: 275 Amps DC. Intermittent Rating: 455 Amps DC. Cranking Rating: 1250 Amps DC. Voltage Rating: 48 Volts DC. Operation: On/Off. Mounting: Recessed or Surface. Termination Stud Size: 3/8" (2 x 10mm). Tin plated cover studs and nuts. Ignition protected.
Stock #Retail
430-15
Request quote

HOUSE BATTERY SWITCH

House/Auxiliary Battery
MARINCO RECREATION
Unique to the Contour Battery Master Switches is the patented contour lock system, allowing the switches to be used as stand alone units, or locked together with other switches. The 701RV also features a control knob which cannot be removed while in the ON or OFF position, but it can be removed by switching to an anti-clockwise 45° position. The 701RV also features removable side plates on 4 sides for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits.
Stock #Retail
430-16
Request quote

BATTERY DISCONNECT

75 Amp Push/Pull Switch
POLLAK™
Multi Purpose Switch; 75 Amp at 6-28 Volts; HD Die-Cast Body; Chrome Plated Knob; 2 Position Push-Pull Off-On; Copper terminals. Mounting Stem 5/8" long, 15/32" diameter.
Stock #Retail
430-19
Request quote

BATTERY BOLT EXTENDER

Top-Mount, 1/Pkg
WIRTHCO ENGINEERING INC.
Simple way to connect power to 12-volt equipment or accessories on top mount batteries.
Stock #Retail
430-2
Request quote

TRUCK BATTERY BOLT

GM Side Mount, 1/Pkg
WIRTHCO ENGINEERING INC.
Designed for GM diesel trucks.
Stock #Retail
430-3
Request quote

K BATTERY BOLT EXTENDER

Universal Battery Bolt, 1/Pkg
WIRTHCO ENGINEERING INC.
Side mount battery bolt extender.
Stock #Retail
430-9
Request quote

4GA NEG. BATTERY TERMINAL

4 Gauge Negative
PICO OF CANADA
Includes Battery Terminal, Solder Pellet and 1-½" piece of Shrink Tube.
Stock #Retail
434-1
Request quote

FUSION CONN. FLAG 1 POS 5PK.

1 & 2 Gauge Positive
QUICK CABLE CANADA LTD.
Solder connections come ready-to-use. Each barrel comes preloaded with solder and flux. Excellent for strong and dependable connections especially in destructive or corrosive environments, 5 per pack
Stock #Retail
434-10
Request quote

FUSION CONN. LUGS (4+6), 5/PK

4 & 6 Gauge 2/8" Hole
QUICK CABLE CANADA LTD.
Solder connections come ready-to-use. Each barrel comes preloaded with solder and flux. Excellent for strong and dependable connections especially in destructive or corrosive environments. 5 per pack
Stock #Retail
434-11
Request quote

FUSION CONN. LUGS (2/0), 5/PK

2/0 Gauge 3/8" Hole
QUICK CABLE CANADA LTD.
Solder connections come ready-to-use. Each barrel comes preloaded with solder and flux. Excellent for strong and dependable connections especially in destructive or corrosive environments. 5 per pack
Stock #Retail
434-12
Request quote

FUSION CONN. LUGS (1), 5/PK

1/0 Gauge 1/2" Hole
QUICK CABLE CANADA LTD.
Solder connections come ready-to-use. Each barrel comes preloaded with solder and flux. Excellent for strong and dependable connections especially in destructive or corrosive environments. 5 per pack
Stock #Retail
434-13
Request quote

4GA 3/8" COPPER LUGS-10/PK

4 Gauge - 3/8" Hole - 10/PK
PICO OF CANADA
Non-Plated Tubular Lug Rings. Non-Plated Pure Copper. Used for heavy duty wiring. Solder or Crimp. 600V Copper Melting Point: 1083°C.
Stock #Retail
434-14
Request quote

2/0GA 3/8" COPPER LUGS-5/PK

2/0 Gauge - 3/8" Hole - 5/PK
PICO OF CANADA
Non-Plated Tubular Lug Rings. Non-Plated Pure Copper. Used for heavy duty wiring. Solder or Crimp. 600V Copper Melting Point: 1083°C.
Stock #Retail
434-15
Request quote

1GA 3/8" COPPER LUGS-10/PK

1/0 Gauge - 3/8" Hole - 10/PK
PICO OF CANADA
Non-Plated Tubular Lug Rings. Non-Plated Pure Copper. Used for heavy duty wiring. Solder or Crimp. 600V Copper Melting Point: 1083°C.
Stock #Retail
434-16
Request quote

4GA POS. BATTERY TERMINAL

4 Gauge Positive
PICO OF CANADA
Includes Battery Terminal, Solder Pellet and 1-½" piece of Shrink Tube.
Stock #Retail
434-2
Request quote

2/0G NEG. BATTERY TERMINAL

2/0 Gauge Negative
PICO OF CANADA
Includes Battery Terminal, Solder Pellet and 1-½" piece of Shrink Tube.
Stock #Retail
434-3
Request quote

2/0G POS. BATTERY TERMINAL

2/0 Gauge Positive
PICO OF CANADA
Includes Battery Terminal, Solder Pellet and 1-½" piece of Shrink Tube.
Stock #Retail
434-4
Request quote

1-2GA NEG BATTERY TERMINAL

1 &* 2 Gauge Negative
PICO OF CANADA
Includes Battery Terminal, Solder Pellet and 1-½" piece of Shrink Tube.
Stock #Retail
434-5
Request quote

1-2GA POS BATTERY TERMINAL

1 & 2 Gauge Positive
PICO OF CANADA
Includes Battery Terminal, Solder Pellet and 1-½" piece of Shrink Tube.
Stock #Retail
434-6
Request quote

FUSION CONN. FLAG 2/0 NEG 5PK.

2/0 Gauge Negative
QUICK CABLE CANADA LTD.
Solder connections come ready-to-use. Each barrel comes preloaded with solder and flux. Excellent for strong and dependable connections especially in destructive or corrosive environments, 5 per pack
Stock #Retail
434-7
Request quote

FUSION CONN. FLAG 2/0 POS 5PK.

2/0 Gauge Positive
QUICK CABLE CANADA LTD.
Solder connections come ready-to-use. Each barrel comes preloaded with solder and flux. Excellent for strong and dependable connections especially in destructive or corrosive environments, 5 per pack
Stock #Retail
434-8
Request quote

FUSION CONN. FLAG 1 NEG 5PK.

1 & 2 Gauge Negative
QUICK CABLE CANADA LTD.
Solder connections come ready-to-use. Each barrel comes preloaded with solder and flux. Excellent for strong and dependable connections especially in destructive or corrosive environments, 5 per pack
Stock #Retail
434-9
Request quote

MSPI BATTERY DISCONNECT

WIRTHCO ENGINEERING INC.
Afety switch designed to protect vehicles and equipment from tampering, theft, and battery drain. Surface mounted In-line.
Stock #Retail
438-1
Request quote

TM8 BATTERY DISCONNECT

Top Mount Battery Disconnect
WIRTHCO ENGINEERING INC.
Install on a voltage systems where disconnection of battery power is desired. Top mount on the battery with wing nut or bolt.
Stock #Retail
438-2
Request quote

ST9 BATTERY DISCONNECT

Side Terminal Battery Disconnect
WIRTHCO ENGINEERING INC.
For use on GM type side terminal batteries on cars and trucks. Heavy duty brass and copper terminals attach directly on the battery. 250-amps, continuous and 750-amps surge. Sidemount opens down, mounts on negative side battery terminal. Provides 3/8 - 16 bolt for receiving standard eyelet cable connector. Is designed for use on side terminal batteries on cars & trucks. 3-1/4" W x 3-3/4" L x 1-1/4" H.
Stock #Retail
438-3
Request quote

QB QUICK BOLT

Battery Quick-Bolt
WIRTHCO ENGINEERING INC.
Battery quick-bolt connectors. Quick release cable clamp bolts replaces standard 5/16" bolts on cable clamps used on most top post batteries. Cam lever action tightens and loosens bolts without tools.
Stock #Retail
438-4
Request quote

TM-8W/WING

Top Mount Battery Disconnect W/Wing Nut
WIRTHCO ENGINEERING INC.
Install on voltage systems where disconnection of battery power is desired. Top mount on the battery with wing nut or bolt. Sold each, size 3" W x 4" L x 2-1/4" H.
Stock #Retail
438-5
Request quote

GREEN KNOB BATTERY SWITCH

Green Knob Disconnect
WIRTHCO ENGINEERING INC.
"(Top post) easy to install on negative battery post. Disconnects all electrical circuits with a simple turn and removal of the knob. This unit is heavy duty and is suitable for 6, 12, or 24 bolt batteries. Rated for 125-amps continuous 500-amps surge. Not intended for marine usage. Knob can be completely removed to deter theft.
Stock #Retail
438-7
Request quote

BATTERY SWITCH WITH FUSE

Stop-K Master Switch
WIRTHCO ENGINEERING INC.
Battery switch with bypass-fuse. Like #438-7 but this one allows the battery to be disconnected without disrupting computer settings. 15-amp bypass fuse maintains trickle current to radio, clock, etc. Knob can be completely removed to deter theft.
Stock #Retail
438-8
Request quote

STOP-K MASTER SWITCH

12-V Key Operate Master Switch
WIRTHCO ENGINEERING INC.
At 12-volt; 1000-amps surge, 100-amps continuous, weather-resistant. Key is used to turn switch on and off. Key is removable in Off position. Spare keys and water proof cover included.
Stock #Retail
438-9
Request quote

CLAMP-ON BATTERY TERMINAL

Universal Battery Terminal
Universal terminal fits 6 gauge to 2/0 gauge cables. Fit positive or negative posts, all lead.
Stock #Retail
455-1
Request quote

WINGNUT BATTERY TERMINAL

Clamp Type Wing Nut
Converts conventional post type battery for marine use or any clamp type application. Fit positive or negative posts, all lead.
Stock #Retail
455-2
Request quote

BATTERY POST ADAPTER

Battery Post Adaptor, Pr.
HORIZON GLOBAL
Battery Post Adapter for General Motors Side Post Batteries. Provides stud for attaching accessories wires.
Stock #Retail
455-3
Request quote

Replacement Ground Connector

18" Wire Length - 12 Gauge
HOPKINS MFG
Ground problems are the leading cause of trailer electrical and lighting failures. Endurance Ground is the fix for common lighting problems including lights flickering, lights not working, wrong lights blinking and rusty grounds. Trailers are continuously exposed to the harsh conditions. Protect your trailer ground with Endurance for years of hassle-free use. Features: Ultimate Waterproofing- Rubber Seal Protects Ground Surface, Stainless Steel Washer Provides Long Life Ground, Marine Grade Splice Protects Wire from Corrosion, 3 Year Warranty From The Date Of Original Purchase.
Stock #Retail
455-4
Request quote

Replacement Ground Connector

18" Wire Length - 16 Gauge
HOPKINS MFG
Ground problems are the leading cause of trailer electrical and lighting failures. Endurance Ground is the fix for common lighting problems including lights flickering, lights not working, wrong lights blinking and rusty grounds. Trailers are continuously exposed to the harsh conditions. Protect your trailer ground with Endurance for years of hassle-free use. Features: Ultimate Waterproofing- Rubber Seal Protects Ground Surface, Stainless Steel Washer Provides Long Life Ground, Marine Grade Splice Protects Wire from Corrosion, 3 Year Warranty From The Date Of Original Purchase.
Stock #Retail
455-5
Request quote

Digital Voltage Sensing Relay

140A - Black
MARINCO RECREATION
The Digital Voltage Sensing Relay (DVSR) allows the charging of a second battery bank from any single charging source. When the voltage on the charged bank rises sufficiently, the DVSR engages allowing the 2nd battery bank to charge. When charging stops and voltage falls, the DVSR automatically isolates the battery banks, ensuring that engine start batteries are kept fully charged. Digital circuitry provides superior reliability and extremely low power consumption.
Stock #Retail
5100-3
Request quote